Matrusree Drum heaters are used to pre-heat liquids in drums or pails to make them less viscous and more flow able. They are suitable heat sources when heat is required to handle liquids during pouring, dipping, coating or mixing operations. Matrusree Drum heaters are made to brace a drum externally and they are easily installed and removed when needed.
Stainless
steel case
Adjustable
heat
Easy
installation and removal
Suitable
for standard drum sizes
6
ft power cord and plug
CSA
certified
Rapid heat-up of drum
Durable metal design
Infinite switch or thermostat
3-heat control
6 ft. power cord
Variety of sizes and ratings
Matrusree drum heaters have a rugged construction, made to withstand the harsh industrial environment. They are available in two styles. The one piece construction heater that comes with a spring loaded handle and a snap action bi-metal temperature controller (220° F). The HDX model is a two piece construction heater that has a latch and trunion fastener with a bulb and capillary thermostat (250° F).
Thermostat Control models sense
temperature in an area remote from the heating element and will automatically
cycle heater to maintain set temperature. Three-heat switch allows three
wattage ratings per thermostat setting and voltage rating.
Matrusree Drum Heater comes
with temperature controllers. When the pilot lamp is on, the heater is Active.
Our models have bulb and capillary thermostats (250° F). Another models have
snap action bimetal temperature controllers (220° F). After an initial trial
these controllers have to be set in proportion to the maximum settings and
required temperature
Matrusree Drum heaters are made for 120V or 240V power supplies. Appropriate power cords and plugs are supplied for each voltage and wattage. The power supply should be rated to handle the amperage drawn by the heater. Different liquids absorb heat at different rates so the wattage of a Drum heater should be selected accordingly.
Since the Matrusree
drum heater is not a sealed product,
it should be used indoors and kept away from moisture and contamination. In
general, these heaters are maintenance free. A periodic check to ensure that
they are securely fastened to the drum is recommended. The power cord is rated to
withstand 220° F and should never come in contact with the heater.
Matrusree drum heaters
should not be used on pressure tight
containers, containers with explosive materials, or in explosive environments
