Matrusree make Thermic fluid heater is industrial heating equipment, used where only heat transfers are desired instead of pressure. In this equipment, a thermic fluid is circulated in the entire system for heat transfers to the desired processes. Combustion process heats up the thermic fluid and this fluid carries and rejects this heat to the desired fluid for concluding the processes. After rejecting it, this fluid comes back again to the thermic fluid heater and this cycle goes on.
The maximum temperature of 350℃ of thermal fluid can be achieved in a Fluidtherm although the higher temperature of the thermal fluid can be achieved provided the temperature of fluid does not exceed the auto-ignition temperature.
These applications are used to heat circulating fluids such as water, fuel oil, as well as air or gases in general at up to 15 bar max.
Ultraviolet Sunlight & UV Lamps
They are fitted with screw plug immersion heater and a safety thermostat.Fluid circulation heaters can be connected hydraulically in series, which allows a very large heating power to be achieved.